190mm L x 80mm W x 70mm H / 7.5" L x 3.1" W x 2.8" H
Standard power supply: 5-12VDC max power consumption
Connectivity housing includes ethernet, wifi, bluetooth 4.2 (beacon only)
Power plug options for EU, UK, USA and some APAC regions
Printer, 30Ips, and 40mm paper roll
Contactless, ewallet reader, triple bi-directional MSR
3.5" HVGA capacitive color touchscreen
Mono audio speaker
~310g / 0.68lbs
These are the steps to get your new V400c Plus payment terminal up and running. More detailed instructions are available below.
- Inspect the terminal.
- Insert the receipt paper roll.
- Open the cover on the back of the terminal, connect the dongle cable, and close the cover.
- Turn on the terminal by connecting it to a power source. During startup the display turns on and off a few times.
- Select Configure network. Then connect the terminal to your network.
Inspect the terminal
Because payment terminals process sensitive card data, you must verify that the terminal you received is the correct one, supplied by Clock, and hasn't been tampered with.
- Verify that the box containing the terminal hasn't been opened and that the security seal is intact. The security seal is a label with the Clock PMS logo, stuck across the lid of the box.
- Break the security seal, take the terminal out of the box, and verify that the serial number (S/N) on the terminal is the same as the serial number on the box.
- Inspect the terminal for tampering. Check for missing seals or screws, additional wires or labels, holes in the device, and anything inserted in or attached to any part of the terminal.
Insert the receipt paper roll
- Pull up the latch of the paper compartment and swing the cover downwards.
- Insert the paper roll making sure the paper sticks out a bit.
- Close the cover of the paper roll compartment.
Connect to your network
Connect your terminal to the internet so that it can communicate with the Adyen payments platform.
Connect to Ethernet LAN
Connect an Ethernet cable to the Ethernet (LAN) port.
That's the port marked with ETH or this symbol:
Connect to Wi-Fi
- On the terminal display, select Configure network.
- Select Wi-Fi.
- Turn on the Wi-Fi toggle switch.
- Select the + icon to add a network. The terminal scans for Wi-Fi networks.
- Choose the desired network from the list and enter the Wi-Fi password, or select Add manually and enter the name (SSID) of the Wi-Fi network and the Wi-Fi password.
- Select the check mark to confirm. The terminal sets the network as default automatically and connects to it. You'll now see a Wi-Fi icon at the top of the display.
Menus and options
|5 + Confirm||Device info|
|8 + Confirm||Transactions menu|
|9 + Confirm||Admin menu|
|* + Confirm||Diagnostics menu|
Select 5 and then the Confirm key to access:
A screen appears, with:
- Model, serial number, and IP address of the terminal.
- Software version and configuration version that the terminal currently uses.
- Merchant account and store that the terminal belongs to.
- A button to show a QR code with device info.
Select 8 and then the Confirm key to access:
Through the transactions menu you can generate a Totals report. This gives an overview of the total amounts for sales, refunds, gratuities (tips), and cancellations that the terminal processed since the last reset of the report. By resetting the report, you can use this functionality to get day totals or shift totals.
Furthermore, you can see the History of transactions and re-print merchant or shopper receipts
|Totals||View, print, and reset totals|
|History||View transaction history and re-print merchant or shopper receipts.|
To obtain the Totals report:
- Go to the Transactions menu.
- Select Totals. Shows the Totals report for the period shown at the top of the report.
- Select an action:
- Print > Yes: prints the Totals report.
- (Optional) To reset the counter after printing the (day or shift) totals, select Yes at the Reset totals? prompt.
- Reset > Yes: starts a new reporting period. The totals from the previous period are no longer shown.
To print another copy of the shopper or merchant receipt for a specific transaction:
- Go to the Transactions menu.
- Select History.
- Select the transaction that you want to reprint a receipt for.
- Click the Print icon and then choose the receipt you want to print: Shopper receipt or Merchant receipt.
Select 9 and then the Confirm key to access:
You'll need the Admin menu on the terminal for various tasks. To open the Admin menu:
|Device info||Opens the device info page|
|Network||Configure network settings. Run diagnostic connection tests. Requires admin passcode.|
Update the terminal software. Requires admin passcode.
|Update, view, or remove the configuration. You can view the configuration version, the installed software release, and hardware details such as the unique terminal ID.Requires admin passcode.|
|Diagnostics||Opens the Diagnostics menu.|
|Power||Can restart or power off the terminal. Requires admin passcode.|
Select * and then the Confirm key to access. You will see various connectivity and hardware test options.