ROMANIA - DxPrint Setup (fiscalization)

Modified on: Mon, 2 Sep, 2024 at 12:57 PM

Print

Setup of DxPrint driver to communicate with Datecs fiscal printers.

Setup requirements:

  • Clock IoT Device
  • Datecs DP25, DP50, DP150, FP650, FP700, FP800, WP50, WP500
  • DxPrint (driver download)
  • Purchase a license with DxPrint at www.dxprint.ro . Each fiscal device requires a separate license.
  • PC with static local IP address with Windows, Linux or MacOS

Setup steps:

1. Connect Clock IoT device in your local network.

2. Connect your Datecs printer/s to your local network, the device should be connected by TCP/IP or directly on PC COM port. 

The printer should be ready for work.

3. Download, install, and set up DxPrint.

3.1. Setup from driver interface or config.json

The driver should be in embedded mode with activated httpServerActiv.

  • Line: 4: "port": select printer communication.
    • "COM1" if printer connected by COM port (/dev/ttyS0 for Linux) 
    • "tcp://192.168.12.179:3999" if the printer is connected by TCP/IP, default printer port 3999, IP address should be checked from the fiscal printer.
  • Line: 19: "httpServerActiv": true,
  • Line 24: "embedded": true
  • Line 20: "httpPort": 8080 (if needed change, default is 8080)
  • Line 83: Add your Dxprint license key, instead of "Cumpara licenta de pe www.dxprint.ro." (there is 14 days trial period)

Start Dxprint service from the driver interface or your operation system terminal and try to open from the internet browser the printer address (in our case 192.168.12.179:3999) If the setup is successful you should see the following page:

4. Open your PMS/POS account, navigate to Settings -> Fiscalization -> Dx Fiscal Driver -> Add new

Add a name for your Dxprint fiscal printer, select the IoT device, and enter the IP address and port of the computer where is DXPrint service installed (NOT the fiscal printer TCP/IP parameters). 

Create payment mapping between your PMS/POS account and DXPrint.

5. Setup your fiscalization settings from Settings -> Fiscalization -> Romanian fiscalization

Done!

Additional notes:

  • One DXPrint license can work with one fiscal device but can be accessed from multiple working stations.
  • The interface accepts fiscal requests only with "RON" folios currency.
  • Reports can be reached from Settings -> Fiscalization -> Dx Fiscal driver -> Your printer -> Operations.
  • In the attachment, you can find DXPrint error codes list.
  • Error: write tcp 192.168.12.xxx:42376->192.168.12.xxx:3999: write: broken pipe - service not available, should be restarted.
  • DxPrint full documentation in Romanian.
xls

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

On this page